FOR LABORATORY RESEARCH USE ONLY — not for human or veterinary use, diagnosis, treatment, or cosmetic application. Buyers must be 21+ and legally permitted to purchase research chemicals in their jurisdiction.Intended-use statement →
OEM & Private-Label Research Peptides
Private-label vials, custom kit configurations and fixed-ratio blends, produced on the same lines as our catalogue and documented batch by batch. This page describes the process and the information we need — the commercial terms come from your quotation.
1. The process, step by step
Enquiry & specification
Send the product, the kit configuration (mg per vial, vials per kit) and the quantity. If you are asking for a blend or a custom ratio, state the target composition.
Feasibility & MOQ confirmation
We confirm whether the specification is feasible from our synthesis and fill lines, and state the minimum order quantity for that configuration. Nothing on this page overrides the figure in your quotation.
Artwork & label review
You supply label artwork (vector preferred) and the exact wording. We check it for the mandatory research-use statement and for claims we cannot substantiate.
Quotation & proforma invoice
Written quotation with unit price, MOQ, lead time, incoterms, payment terms and packing specification. Your order is the configuration stated on that document.
Production & fill
Synthesis, purification, lyophilization and fill to the agreed configuration, with in-process checks recorded against the lot.
QC & documentation
Batch-specific COA (HPLC purity, ESI-MS identity, appearance, moisture) plus commercial invoice, packing list and any SDS or end-use statement requested at order stage.
Dispatch
Export packing, carrier handover and tracking. Cold-chain and desiccant options are selected at quotation according to the destination.
Minimum order quantities and lead times are configuration-specific and are confirmed in writing in your quotation. No figure on this page constitutes a commitment.
2. What can be customised
| Element | What is possible |
|---|---|
| Vial size and fill | Milligram fill per vial within validated ranges, subject to the product's handling characteristics. |
| Vials per kit | Standard kits are 10 vials; other counts are confirmed per product at quotation. |
| Kit configuration | Single peptide, fixed-ratio blend, or a multi-component kit such as the GLOW and KLOW configurations. |
| Label and carton artwork | Your brand artwork on vial labels and cartons, subject to the mandatory research-use statement remaining intact and legible. |
| Documentation pack | COA, SDS, end-use statement and certificate of origin supplied to your format requirements where we can do so accurately. |
| Blind / neutral presentation | Unbranded presentation for distributors who label locally. This does not mean unexplained material: your documents and ours must still describe the product accurately. |
3. What we need from you
- Target specification: product, fill per vial, vials per kit, total quantity.
- Label artwork and the exact text you want printed, including your company identifiers and any address for returns.
- The consignee entity and destination, so that packing and the document pack match the import route.
- Requested documents (SDS, end-use statement, certificate of origin, specific COA layout).
- A contact who can approve artwork — label approval is the step that most often lengthens a project.
4. What we will not do on a private label
- We do not print regulatory or certification claims on a private label unless they can be substantiated against a current certificate, and we will say so if they cannot.
- We do not remove the research-use-only statement from a label. It is a condition of supply, not an option.
- We do not help a label imply a human or veterinary use, a cosmetic use, or a therapeutic purpose.
- We do not state fixed MOQ or lead times on this page: both are configuration-specific and are confirmed in your quotation.
5. Commercial reference points
Standard catalogue kits are sold at the published list price, tiered volume discounts apply (see the tier table). Custom configurations and private-label runs are quoted per project, because fill size, artwork and documentation layout all affect cost.
The engineering cost of a custom run shows up at the front end: feasibility review, fill validation and artwork approval. Buyers who start with a standard kit to validate the product, then move to a private label, generally spend less than buyers who begin with a bespoke configuration.
FAQ
What is the minimum order quantity for a custom configuration?
It depends on the product and configuration, and it is stated in your quotation rather than on this page. For standard catalogue kits the minimum is 1 kit (10 vials); custom fills, blends and private-label runs carry a higher minimum because of the set-up involved.
How long does an OEM project take?
It depends on whether artwork is ready and whether the configuration needs a new synthesis batch. The lead time is confirmed in the quotation. Projects stall most often at label approval, so approving artwork early is the biggest available time saving.
Can you produce a blend that is not in your catalogue?
Yes, if the components are catalogue products and their combined handling is compatible. Custom ratios are confirmed at quotation; we will tell you if the requested combination is not feasible.
Will you print my certification claims on the label?
Only if the claim can be substantiated against a current certificate you provide. We will not print an ISO, GMP or pharmacopoeia claim on a private label without one.
Start a private-label project
Send the specification, target quantity and artwork status. You will get a feasibility answer, the MOQ for that configuration, and a written quotation.
Request an OEM Quotation